DuraVent FasNSeal 7" 29-4C Stainless Steel Male Flex Adapter d31.5 Hardware is included for the

Hardware is included for the Inside Collar

Model NV 3844NAT-DOORS Unit Dimensions 23 1/2" H X 32" W X 14 1/4" D Minimum Fireplace Dimensions 25 1/8" H X 33" W X 12 1/2" D Weight 115 lbs Classic Mantel Dimensions 49 1/2” W x 44” H x 18 1/2” D Contemporary Mantel Dimensions 52 1/2” W x 43  1/2” H x 21 3/4” D Prestige Mantel Dimensions 60 1/8” W x 39 5/8” H x 18 3/8” D Standard Legs Height 31 1/4" Pedestal Height 10 1/8"  Oxygen Depletion Sensor Yes Piezo Matchless Ignition Yes Heating BTU/Hour 33

Front Width (A) 42-1/2" (1080mm) 43" (1092mm) Height (B) 38" (965mm) 38-1/8" (968mm) Depth (C) 24" (610mm) 23" (584mm) Rear Width (D) 42-1/2" (1080mm) 43" (1092mm) Glass Size (E x F) 33" x 21-5/8"

Product Code Part No Size 4DT-VPHKB 1604680 4-Inch

Model 613012 Clearance Zero/Zero clearance when installed into a masonry chimney and wrapped with a 1/2" ceramic fiber insulation blanket

DuraVent FasNSeal 7" 29-4C Stainless Steel Male Flex Adapter d31.5 Hardware is included for theAll FasNSeal (single wall) vent lengths and components feature patented built in mechanical locking band and triple lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 from mechanical locking bands. This construction feature allows for ease of installation. The air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield